What to do if my KlipXtreme Speaker System has no sound?
If your KlipXtreme Speaker System isn't producing any sound, there are a few things you can check: * Ensure the volume isn't set too low; adjust it to a suitable listening level. * Verify that you've selected the correct input mode for your external source. * Make sure all speaker connections are correctly connected.
Why is my KlipXtreme ZounDtastik KLS-670 Speaker System sound distorted?
Distorted sound from your KlipXtreme Speaker System can be due to a couple of reasons. First, the master volume might be set too high, so try decreasing it. If that doesn't solve the issue, the speaker itself might be damaged, in which case you should check or replace it.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Bluetooth Range | 10 meters |
| Water Resistance | IPX5 |
| Frequency Response | 80Hz - 18kHz |
| Impedance | 4Ω |
| Microphone | Yes |
| Charging Time | 3 hours |
| Battery Type | Lithium-ion |
| Charging Port | Micro USB |
| Playback Time | Up to 14 hours at 50% volume |
| Connectivity | Bluetooth, AUX, USB |
| Weight | 500g |
| Additional Features | LED lights |
| Power Supply | 5V/1A |
| Signal to Noise Ratio | ≥80dB |
To Next Page
