MATERIAL SAFETY DATA SHEET
PURE GOOP
TM
November 2003
Page 1 of 4
1. PRODUCT IDENTIFICATION
PURE GOOP: Thread lubricant
Manufactured by: Emergency Contact:
Swagelok Company Chemtrec (800) 424-9300
29500 Solon Road
Solon, Ohio USA 44139
Tel: (440) 248-4600
Fax: (440) 349-5970
2. INGREDIENTS
Ingredients CAS # WT% PEL
Polychlorotrifluoroethylene
9002-83-9 75-85 Not Available
Polytetrafluoroethylene
9002-84-0 15-20 Not Available
Amorphous Silica
7631-86-9 1-5 Not Available
3. HEALTH HAZARD INFORMATION
• European Community Danger Group:.............. None
• Special Hazards for man or environment: ....... None
• LD
50
/LC
50
......................................................... Not Available
Routes of Entry
Skin Contact Skin Absorption Eye Contact Inhalation Ingestion
No No Yes Yes Yes
4. FIRST AID MEASURES
• If inhaled (Overexposure): If person is affected by fumes, remove person to fresh air.
Seek medical attention.
• After contact with skin (Overexposure): Wash thoroughly with soap and water. If severe irritation
develops, seek medical attention.
• After contact with eyes: Rinse thoroughly with water for 15 minutes, seek medical
attention. Do not rub eyes.
• If swallowed: Seek medical attention.
• Medical information: Unlikely to cause ill effects. Inhaling fumes of decomposition
products can cause temporary influenza-like symptoms which
are described as “polymer fume fever”. Symptoms include
fever, cough, and malaise.
5. FIRE FIGHTING MEASURES
To Next Page
Loading...