MATERIAL SAFETY DATA SHEET
PURE GOOP
TM
November 2003
Page 3 of 4
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Odor pH Density Vapor Pressure
Opaque-white Neutral Not Applicable 2.1 gm/cm
3
<0.01mm Hg
Boiling Point Melting Point Flash Point Flammability Explosive
Not Available Not Available Not Available Not Available Not Applicable
10. STABILITY AND REACTIVITY
• Conditions to avoid: May decompose above 500°F/260°C to produce organo-chlorine or
compounds, organo-fluorine compounds, hydrogen fluoride, and chlorine
gas.
• Materials to avoid: Sodium, potassium, barium, calcium, finely divided zinc,
aluminum, magnesium, and beryllium. Avoid aluminum-threaded
connections where galling and seizure may initiate a reaction. Reacts
with amines, liquid fluorine, and liquid chlorine trifluoride.
• Hazardous decomposition products: See Sections 4 and 5.
11. TOXICOLOGICAL INFORMATION
• Acute toxic properties: None known.
• Health effects: See Sections 4 and 5.
• Additional health effects: None known.
Sensitization
Teratogenicity
Reproductive
Toxicity
Mutagenicity
Synergistic
Products
Carcinogenicity
Not Available Not Available Not Available Not Available Not Available Listed ingredients
are not suspected
carcinogens
according to NTP,
and IARC
12. ECOLOGICAL INFORMATION
• Mobility: Paste-like viscosity.
• Degradability: Not established.
• Accumulation: No known adverse bioaccumulation or biomagnification effects.
• Short / Long term effects
on ecotoxicity: No known ecological effects.
To Next Page
Loading...