Koala Kare KB200-01SS - User Manual

KOALA KARE PRODUCTS
KB200-SS HORIZONTAL WALL MOUNTED
BABY CHANGING STATION WITH STAINLESS STEEL VENEER
KB200-01SS GREY
KB200-05SS WHITE GRANITE
35
3
/ 16 ”
(894 mm)
19
11
/ 16 ”
(500 mm)
18
5
/ 32 ”
(461 mm)
42¼”
(1,073 mm)
to floor
3¾”
(95 mm)
16” (406 mm)
between holes
Floor
KB200-SS TECHNICAL DATA SHEET
BW HALFTONE

Summary

Product Materials

Product Operation

Product Specifications

Installation Guide

Drilling Holes and Mounting

Steps for preparing wall, drilling pilot holes, and securing the changing station using provided hardware.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Koala Kare KB200-SS is a horizontal wall-mounted baby changing station featuring a stainless steel veneer. It is available in two finishes: KB200-01SS Grey and KB200-05SS White Granite.

Function Description:

This device is designed to provide a safe and convenient surface for changing babies in commercial and public restrooms. It is a wall-mounted unit that folds down to create a changing bed and folds up to conserve space when not in use. The station incorporates a concealed pneumatic cylinder and metal mounting chassis, which ensures a controlled, slow opening and closing of the bed, enhancing safety and ease of use.

Important Technical Specifications:

• Materials: The body of the baby changing station is made from FDA-approved injection-molded polypropylene, which includes a Microban® antimicrobial additive embedded into the bed surface. The front surface features a Type 304 brushed stainless steel finish veneer.
• Hinge Mechanism: It utilizes a reinforced steel-on-steel hinge mechanism and a metal mounting chassis. No hinge structure is exposed on interior or exterior surfaces.
• Dimensions (Closed):
  • Width: 35 3/16" (894 mm)
  • Height: 18 5/32" (461 mm)
  • Depth from wall: 3 3/4" (95 mm)
• Dimensions (Open):
  • Width: 35 3/16" (894 mm)
  • Depth from wall: 19 11/16" (500 mm)
  • Height (from floor to handle area): 44" (1118 mm)
  • Height (from floor to changing surface): 33" (838 mm)
  • Height (from floor to bottom of bed): 29 1/4" (743 mm)
  • Overall height from top mounting hole to floor: 42 1/4" (1073 mm)
• Changing Surface Area: The contoured changing surface area is 450 sq. in (2903 sq. cm).
• Liner Dispenser: Features a dual-cavity liner dispenser capable of holding approximately 50 KB150-99 bed liners.
• Mounting: Designed for wall mounting with holes spaced 16" (406 mm) between centers. Mounting hardware is included.
• Compliance:
  • Complies with ASTM static load performance requirements when properly installed.
  • Complies with ADA regulations when properly installed.
  • Design and manufacture are intended to be compliant with the 2010 ADA Standards for Accessible Design and the 2009 ICC A117.1, Accessible and Usable Buildings and Facilities.
  • Conforms to ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use.
  • Conforms to ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008, ASTM G22 Antibacterial standards.
• Weight Capacity: Designed to support intended loads when properly installed.

Usage Features:

• Safety Strap: Includes a nylon safety strap to secure the baby during changing.
• Bag Hooks: Equipped with two hooks for bags or purses, providing convenience for caregivers.
• Liner Dispenser: Built-in dispenser for 3-ply chemical-free biodegradable bed liners, ensuring a hygienic changing surface for each use.
• Instructional Graphics: Labelled usage instructions and safety messages are provided in four languages directly on the unit.
• Braille Label: An optional Braille label is available for accessibility.
• Smooth Operation: The pneumatic cylinder ensures a controlled, slow opening and closing motion, preventing sudden drops or slams.
• Space-Saving Design: The wall-mounted, fold-up design allows the unit to be stored compactly when not in use, maintaining clear paths of travel.

Maintenance Features:

• Easy to Clean: The polypropylene material is easy to clean and resists odors and bacterial growth, contributing to a sanitary environment.
• Antimicrobial Protection: The Microban® antimicrobial additive embedded in the bed surface inhibits the growth of bacteria, mold, and mildew.
• Durable Construction: The robust injection-molded polypropylene body and stainless steel veneer are designed for long-lasting performance in commercial settings.
• Manufacturer's Warranty: Backed by a manufacturer's 5-year limited warranty on materials and workmanship, which also includes a provision for replacement caused by vandalism.
• Replacement Parts: Replacement parts and additional liners can be purchased from local distributors or directly from Koala Kare.
• Made in U.S.A.: The unit is manufactured in the U.S.A.

Koala Kare KB200-01SS Specifications

General

Brand	Koala Kare
Model	KB200-01SS
Category	Baby & Toddler Furniture
Language	English