13
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualied service technician.
WARNING
• Before cleaning or performing any maintenance, remove the battery from the tool. Never
disassemble the tool, battery pack or charger. For safe and proper operation, always keep
the tool and its ventilation slots clean.
WARNING
• To reduce the risk of personal injury and damage, never immerse your tool, battery pack or
charger in liquid or allow a liquid to ow inside the motor or the battery.
Cleaning
Always use only a soft, dry cloth to clean your vacuum; never use detergent or alcohol.
Storage
Before storing your vacuum, empty and clean the tank, lter, and accessories. Remove the
battery pack. Store indoors. Keep away from corrosive agents, such as garden chemicals and
de-icing salts.
Accessories
WARNING
• Always remove battery pack before changing or removing accessories. Only use lter
(Model NO. KVF 124-03) specically recommended for this tool. Others may be hazardous.
TROUBLESHOOTING
WARNING
• Turn the switch to the “OFF” position, and remove battery from the tool before performing
troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not work. 1. Low battery capacity.
2. The battery pack or vacuum
is too hot.
1. Charge the battery
pack.
2. Turn off the vacuum
and allow the vacuum
and battery pack to
cool.
To Next Page
Loading...
Need help?
General