4.2.4 Diode Test
Function Resolution Test Condition Accuracy
0.001V
Forward DC current approx. 1mA.
Reversed DC voltage approx. 1.5V.
1.0% uncertainty
Overload protection: 250V DC or 250V AC rms.
4.2.5 Continuity Check
Function Range Resolution Description Test Condition
200 0.1
Continuity
beeper75
Open circuit voltage:
approx. 0.5V
Overload protection: 250V DC or 250V AC rms.
4.2.6 Temperature
Function Range Resolution Accuracy
ºC
-20ºC ~0ºC
1ºC
(5.0% of rdg + 4ºC)
0ºC ~400ºC (1.0% of rdg+3ºC)
401ºC ~750ºC (2.0% of rdg+3ºC)
Overload protection: 250V DC or 250V AC rms.
Temperature specifications do not include thermocouple errors.
5. MAINTENANCE
This section provides basic maintenance information, including battery replacement
instructions.
Do not attempt to repair or service your Meter unless you are qualified to do so and have
the relevant calibration, performance test, and service information.
5.1 General Maintenance
To avoid electrical shock or damage to the meter, do not get water inside the
case. Remove the test leads and any input signals before opening the case
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
To Next Page
Loading...