What to do if sound only comes from one channel on my KODA Amplifier?
If you're experiencing sound coming from only one channel on your KODA Amplifier, it could be due to a few reasons. First, ensure that all speaker connections are securely connected. Similarly, check that all input/output lead connections are properly connected. Finally, verify that the left/right balance is correctly adjusted.
How to troubleshoot no sound from my KODA Amplifier?
If you're not getting any sound from your KODA Amplifier, there are several things to check: 1. Make sure the power cable is properly connected. 2. Ensure the volume isn't turned down to the minimum; adjust it to a suitable level. 3. Verify that the speaker output selector is in the correct position. 4. Check the audio input socket to be sure that the connection is correct.
Why is my KODA Amplifier distorting?
If you are experiencing distortion with your KODA Amplifier, the volume might be set too high. Try reducing the volume to a more acceptable level.
General| Bluetooth | Yes |
|---|---|
| Number of Channels | 2 |
| Frequency Response | 20Hz - 20kHz |
| Amplifier Type | Class D |
| Outputs | Speaker Terminals |
| THD | <0.1% |
| Impedance | 4-8 Ohms |
| Inputs | RCA |
| Input Voltage | AC 110-240V |
| Signal-to-Noise Ratio | >85dB |
To Next Page
