Quick Start Guide
KODAK CHERISH C120/C125
SMART BABY UNIT EN
For full explanation of all features and instructions,
please refer to the Setup & Installation Guide.
(I) Add As An Additional Camera (for C220,C225,C520,C525)
1. Press “
” on the Parent Unit for the menu bar.
2. Press “ ” or “ ” button to select , then “ ”
to proceed to the next step.
3. Press “ ” to add camera, then “ ” to proceed.
4. Press the “ ” button or “ ” button to select the
desired camera number. (e.g: ) Press “ ” to add
a camera.
5. You will then see a sign “ ” to indicate you to
press and hold the pair button of the baby unit until
you hear the beep from the Baby Unit. After that,
video from the camera.
(II) Switch on the Baby Unit
Slide to the ON or OFF position to switch ON or OFF
the unit.
C120C125
STRANGULATION HAZARD-Children have STRANGLED in cords. Keep this
cord out of the reach of children (more than 3ft (1m) away) from the crib.
Do not use with an extension cord. Only use the AC Adapters provided.
WARNING:
To Next Page
Need help?
General
