Page | 10 Introduction
BABY UNIT OVERVIEW
INSTRUCTIONS OF HOW TO WALL MOUNT THE CAMERA (C125)
INSTRUCTIONS OF HOW TO WALL MOUNT YOUR C125 CAMERA
Baby Unit Overview
9mm
1. First, put the screws on the wall. The diame-
ter of the screws should be at least 5mm and
maximum of 9mm. The distance between two
screws should be 20mm.
2. Place and match the wider holes on the base
of the camera with the screws.
3. Slide the base of the camera downwards so that the
screws lock towards the narrow side.
20mm
To Next Page
Loading...
