Quick Start Guide
For full explanation of all features and instructions,
please refer to the Setup & Installation Guide.
(I) Setup in App
(II) Pairing between the Baby Unit and the Parent Unit
1. Download the KODAK Smart Home app from the APP STORE (iOS) or
GOOGLE PLAY Store(Android).
2. Create or login to your account.
3. Add the KODAK CHERISH C525 Baby Monitor to your KODAK Smart
Home app.
4. Follow the instructions to set up your Baby Monitor.
5. Pairing in progress. Wait until you hear the message “Setup Completed.”
6. Once paired, test your Baby Monitor. Move your router if necessary.
The Baby Unit comes pre-registered to the Parent Unit. Simply connect the
power supply for both the Baby Unit and the Parent Unit to start using.
1. Connect the small end of the power adapter to the Baby Unit and the
other end to the electrical outlet. Only use the adapter supplied
(5V DC/1500mA). Ensure the ON/OFF switch is in the “ON” position.
2. Connect the small end of the power adapter to the Parent Unit and the
other end to the electrical outlet. Only use the adapter supplied
(5V DC/1500mA).
STRANGULATION HAZARD-Children have STRANGLED in cords. Keep this cord
out of the reach of children (more than 3ft (1m) away) from the crib. Do not use
with an extension cord. Only use the AC Adapters provided.
WARNING:
KODAK CHERISH C525
SMART BABY MONITOR
To Next Page
Need help?
General
