51 www.kodak.com/go/support
Doing more with your frame
Manually changing USB connection mode
The connection mode must match the device to which you connect the frame:
Computer or Printer. The default is Connect to computer. You can change the
connection mode.
1 Disconnect the printer or computer from the frame.
2 On the frame, tap (Home), then tap (Settings).
3 Slide to highlight Device configuration, then tap Select.
4 Highlight USB connection mode, then tap Select.
5 Slide to highlight the mode you want to connect to, printer or computer, then tap
Save.
6 Reconnect the device (printer or computer) that matches the connection mode in
step 5.
To Next Page
Loading...
