5-96 2G0947 - 31JAN08
Diagnostics
Condition Code: 28-551
Description
This error occurs if the PROCESSOR RTD indicates that the temperature is not
rising at the expected rate. This error shuts down the PROCESSOR DRUM
HEATER. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Condition Code: 28-554
Description
This error occurs if the PROCESSOR RTD indicates that the temperature is
higher than the limit. This error shuts down the PROCESSOR DRUM
HEATER. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Web Portal Message Log Message DICOM Message Severity
Processor Heater Failure Processor failed to warm up
when heater turned on
PROC DOWN 0-Fatal
Web Portal Message Log Message DICOM Message Severity
Processor Over Temperature Processor Over Temperature PROC DOWN 0-Fatal
To Next Page
Loading...
