Troubleshooting FAQs
26 www.kodak.com/go/easysharecenter
I can’t find my network. Why?
■ Is your network set up to broadcast SSID? If so, you must enter your wireless
network information manually. The person who set up your network can help you
with this information.
■ Does your network have security enabled (WEP or WPA)? If so, follow the
instructions on page 15.
I can’t find my network computer. Why?
■ Make sure your router and your computer are on.
■ Make sure your computer is on your wireless network. See the documentation that
came with your router and your computer.
■ Is Media sharing enabled in Windows Media player 11? See page 8.
■ Is your frame allowed to share content with your computer? See page 17.
I didn’t connect to my network the first time I turned on my frame. Can I do
it now?
Yes, you can.
1 Press Home on the remote control, then select
Settings
>
Network
>
Manual
>
Enable/disable connections
>
Enable
.
2 Press the Back button.
3 Select
Network
> S
can for wireless networks
.
4 Continue with step 3 on page 14.
2F6599_en
To Previous Page
Loading...
