Kodak EasyShare M1020 - Setting the Clock and Timer

Changing settings and more
www.kodak.com/go/support
25
Setting the clock and timer
Manually setting the clock
1 Tap (Home), then (Settings).
2 Highlight Clock and timer, then tap OK.
3 Highlight Set time, then tap OK.
4 Slide to set the hour. Tap the right arrow to highlight the next setting (minutes),
then slide to adjust it.
5 Tap OK to accept your changes.
Setting automatic on/off
Set your frame to turn on and off at a specified time every day.
NOTE: Set the clock before enabling auto on/off.
1 Tap (Home), then (Settings).
2 Highlight Clock and timer, then tap OK.
3 Highlight On/Off schedule, then tap OK.
The current time is displayed and the hour field is highlighted.
4 Slide to adjust the hour. Tap the right arrow to highlight the next setting (minutes),
then slide to adjust it. Repeat to set Turn off time.
5 Tap Enable, then OK when you’re done.
Your frame will now automatically turn on and off at the times you specified.
NOTE: Make sure the power button on the frame is On. See page 2.
If your frame loses power, the clock time returns to the factory setting and the
automatic on/off times, if set, are disabled. To reset the clock and re-enable your
on/off times, see Resetting the clock after losing power, page 30.