Troubleshooting and support
www.kodak.com/go/support
12
Nothing happens when
a memory card or USB
device is connected.
■ Insert a certified SD/SDHC/MMC/XD Card, with images, into the
upper designated card slot, then push to seat it (see page 3).
■ Insert a certified MS/MS Pro Duo Card, with images, into the lower
designated card slot only, then push to seat it (see page 3).
NOTE: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to
remove.
■ Make sure the USB device is connected securely (see page 3).
■ Make sure the file format of your pictures is supported. (See
page 15).
NOTE: Pictures may take a longer time to display when the files are large or when
using a large capacity memory card or other connected device.
If... Try one or more of the following
To Next Page
Loading...
