SERVICE MANUAL
4 30APR96 – SM4530-1
Section 1: Replacements and Installations
Replacing the LOWER HOUSING ASSEMBLY
Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Remove the PROJECTION LENS.
[3] Remove the LAMP MODULE ASSEMBLY.
[4] Remove the 6
Torx
SCREWS (for N.P. models) (or 6
Phillips SCREWS for Painted Models) from the LOWER
HOUSING ASSEMBLY.
[5] Pull the LOWER HOUSING ASSEMBLY off the TOP HOUSING.
Installing the LOWER HOUSING ASSEMBLY
[1] Do the replacement procedure for the LOWER HOUSING ASSEMBLY in reverse order.
A100_0012HA
LAMP MODULE
LOWER HOUSING
SCREW (6)
A100_0012HCA
To Next Page
Loading...
