SERVICE MANUAL
23JUL01
SM5766-1
Page
2 of 96
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Description Page
Table of Contents
Removals and Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
WIRE ASSEMBLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Removal for the LOWER HOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation for the LOWER HOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Removal for the FAN SHAFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation for the FAN SHAFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . 10
Removal for the MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation for the MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removal for the WORM PULLEY and MECHANISM BELT. . . . . . . . . . . . . 13
Installation for the WORM PULLEY and MECHANISM BELT. . . . . . . . . . . 14
Removal for the THERMAL FUSE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 15
Installation for the THERMAL FUSE ASSEMBLY . . . . . . . . . . . . . . . . . . . . 16
Removal for the LAMP MODULE RECEPTACLE. . . . . . . . . . . . . . . . . . . . . 17
Installation for the LAMP MODULE RECEPTACLE. . . . . . . . . . . . . . . . . . . 18
Removal for the CYCLE SOLENOID ASSEMBLY . . . . . . . . . . . . . . . . . . . . 19
Installation for the CYCLE SOLENOID ASSEMBLY . . . . . . . . . . . . . . . . . . 20
Removal for the MECHANISM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installation for the MECHANISM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . 22
Removal for the AUTO-FOCUS BRACKET ASSEMBLY - 1500 and
2000 PROJECTORS Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation for the AUTO-FOCUS BRACKET ASSEMBLY - 1500 and
2000 PROJECTORS Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Removal for the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY 24
Installation for the CAM STACK ASSEMBLY and
CYCLE LEVER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Removal for the Style 2 LAMP SOCKET TERMINAL ASSEMBLY . . . . . . . 30
To Next Page
Loading...
