SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
31 of 96
5 Remove the LAMP DOOR PLATE ASSEMBLY.
6 Release the 2 TABS on the bottom side of the LAMP MODULE next to the LAMP
MODULE DOOR.
Caution
Remove the CONDENSER LENS and HEAT ABSORBING GLASS and set the parts on a
clean cloth. Do not set on a cold surface; this will cause damage to the parts.
7 Remove the LAMP SOCKET TERMINAL ASSEMBLY.
8 Remove the LAMP EJECTOR.
Installation for the LAMP SOCKET TERMINAL ASSEMBLY
1 Do the removal for the LAMP SOCKET TERMINAL ASSEMBLY in reverse order.
To Next Page
Loading...
