SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
33 of 96
Installation for the LENS MOUNT ASSEMBLY - 1500 and
2000 PROJECTORS Only
1 Do the removal for the LENS MOUNT ASSEMBLY in reverse order.
Removal for the LENS MOUNT ASSEMBLY - 500 and
1000 PROJECTORS Only
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER
HOUSING ASSEMBLY.
3 Disconnect the 3 CONNECTORS on
the MAIN BOARD. It is not necessary to
disconnect the CONNECTOR next to
the LOWER LIGHT BAFFLE
ASSEMBLY.
4 Lift the MAIN BOARD up.
5 Remove the FOCUS KNOB.
6 Remove the 3 SCREWS from the LENS
MOUNT ASSEMBLY.
7 Lift and remove the LENS MOUNT
ASSEMBLY.
A091_0005GA
A091_0005GCA
SCREW (3)
ASSEMBLY
MOUNT
LENS
To Next Page
Loading...
