Kodak EKTAPRO - Page 32

Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
32
 by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
Lenses
Lens Support
n Installation
Hex Screw
1.
1. Screw hex screw into the insert.
2. Use the hex spanner to screw hex
screw with the insert into the
projector’s hole.
3. Remove hex screw and fix
baseplate as shown in the picture.
The insert remains in the hole.
Brass
Insert
Slot up!
3.
2.
Slot up!
Insert
Hex Screw
Hex Spanner
Hex Spanner
Hex Screw
Insert
Position for lenses with a
small diameter.
Position for lenses with a
large diameter. Turn
baseplate.