Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
41
by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
Extra Bright Lamp Module
Sweat Spots
n Sweat Spots
Due to the higher slide gate temperature of the Extra Bright Lamp Module, sweat spots may appear
faster when glass mounted slides are used (in long term projections). As soon as the slides warm up
the spots will disappear. Have a look at the following hints:
• Switch on the projector with the loaded tray approx.
half an hour before you start your presentation and let the
projector transport (using the built-in timer.) The slides
will warm up.
• Leave the projector with the loaded tray overnight in the
standby mode. Heat will be sufficient to warm up your
slides.
• If you do not need highest light output, use the economy
lamp setting or use the FHS or EXY lamp.
To Next Page
Loading...
