Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
55
by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
Professional Installation
Line-up
n Line -Up
Ektapro
4020, 5020,
7020, 9020
Aligning the projectors i.e. fully fading up all projectors, in
multivision operation is difficult, since dissolve units often do
not provide this kind of option.
With the Line-up feature you can turn the light of every
projector on and off independently. This means the projectors
can be aligned or checked at any time.
You can only set the line-up on the projector panel. (The
external controlling via P-Bus is rejected during setting. With
line-up standby will also be switched off and the shutter will be
opened):
Line-up on: Press both transport buttons on the projector
simultaneously for at least 1 second. The lamp now lights up at
a maximum output and the zero position indicator (green LED)
flashes.
Line-up off: Press the standby button!
Note, line up slides are offered by the professional
slide mount manufacturer. Sometimes manufacturer
of control systems offer them, too.
To Next Page
Loading...
