15
C- Sensitivity setting
Notify enable
: This part
allow you to activate the
notifications or not
(message on your
screen indicating that
your camera detects
something).
Detect mode
: Activate
the motion detection
and set the sensitivity.(In
Detect mode: click
Software).
Motion mask
: Select or
deselect the areas you
with motion detection.
Note : Due to the technology, you may have nuisance tripping due to changes in
brightness, or nearby waves. Thus, we recommend that you avoid pointing your
camera at a source of brightness (window), and vary the brightness level.
To Next Page
Loading...
