6
III- Ethernet installation
1 From your phone, download and install the free KODAK Security app
2 Plug in the camera.
3. Reset the camera as previously indicated (wait 60 seconds)
4 Tap « + », and select « Wifi cameras ».
5 Tap on « For an existing camera » and scan the QR Code of the camera
6 Name your camera and type the default security code "123456"
7 Your camera has been connected. Click on the settings wheel to enter in the
advanced settings
8 Go to the WIFI settings in the basic settings
9 Select your Wi-Fi network and enter the corresponding password
10 Unplug the Ethernet cable. The camera will restart and will be switched to
the WIFI network
To Next Page
Loading...
