EN | 15
Manual Keystone – Adjust the keystone manually.
Auto Keystone – Turn the auto keystone on or o.
Projection Mode – Select between front projection, front ceiling projection, rear front
projection, or rear ceiling projection.
• Front: The projector is placed on a table in front of the screen. This is the most
common way to position the projector for quick setup and portability.
• Front ceiling: The projector is suspended upside-down in front of the screen. A
ceiling/wall mount kit is required (not included).
• Rear: The projector is placed on a table behind the screen. A special rear projector
screen is required (not included).
• Rear ceiling: The projector is suspended upside-down from behind the screen. A
special rear projector screen and ceiling/wall mount kit are required (not included).
NOTES:
For more control over projector height, you can place it on a tripod (sold separately).
The distance between the projector lens and the screen determines the projector
screen size.
Project Ratio – Select or adjust the aspect ratio.
To Next Page
Loading...
