A-61671 / TWAIN February 2013 11
The Image Settings
window
From this window you can define image processing options by using
the available tabs. The values used in Image Settings are saved in the
selected Setting Shortcut. The Image Settings window includes the
following tabs by default: General, Size, Adjustments (color/grayscale
and black and white) and Enhancements.
This section describes the TWAIN default interface (as it is presented
through the Scan Validation Tool). Your host application may modify the
interface by not displaying some tabs or limiting the options presented.
Side — allows you to select which side and image to configure (e.g.,
Front, Back, Both: Color (24-bit), etc.). All image settings will be applied
to the selected image.
NOTE: The Side option is only available when advanced settings have
been selected on the Advanced tab.
Advanced Image Setup: displays the Advanced tab.
To Next Page
Loading...
