40 A-61671 / TWAIN February 2013
Device - General tab The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper Source
• Document Feeder: the input elevator is in the highest position. This
selection is recommended when you are scanning 25 sheets or less
from the input elevator.
• 100 Sheets — this selection is recommended when you are
scanning between 25 and 100 sheets from the input elevator.
• 250 Sheets — this selection is recommended when you are
scanning between 100 and 250 sheets from the input elevator.
• 500 Sheets — this selection is recommended when you are
scanning between 250 and 500 sheets from the input elevator.
• 750 Sheets — this selection is recommended when you are
scanning between 500 and 750 sheets from the input elevator.
Power Saver — allows you to set the amount of time, in minutes, the
scanner has to be inactive before going into power saver mode.
Power Off — allows you to set the amount of time, in minutes, the
scanner has to be in power saver mode before it automatically turns off.
NOTE: The Power Saver setting is shared with all Setting Shortcuts.
Any changes will affect other shortcuts unless you turn on the
Only save to this Setting Shortcut option.
To Next Page
Loading...
