2-2 A-61670 August 2014
2. Select Install Scanner Software.
NOTES:
• If the CD/DVD does not start automatically, open the My Computer icon
on your desktop. Double-click the icon indicating your CD-ROM drive,
then double-click on setup.exe.
• If the message, Portions of this application are already installed is
displayed, click Yes to continue the installation process. Any previously
installed Kodak Scanner software that is shared with this scanner will be
updated.
3. Click Next when the Welcome screen is displayed and follow the prompts
on the screen.
NOTE: If you are installing VRS, you will be asked to read and agree to
the VRS Software License Agreement the first time the VRS
software is run.
4. Click Finish when the installation is complete.
5. Remove the Installation CD/DVD from the CD-ROM drive.
To Next Page
Loading...
