3-18 A-61670 August 2014
Viewing the Scan history 1. Touch Scan History. The Scan History for the last 8 days of scanning will
be displayed.
2. When finished, touch Close.
Viewing the Maintenance
meters
Use the Maintenance Meters to monitor when you need to replace
consumables. When you finish changing the feed module tires, feed module,
separation pad, separation module or the separation roller tires, you can
access the maintenance meters and reset the counter.
1. Touch Maintenance Meters. The Maintenance Meters screen will be
displayed.
2. When you finish changing a consumable, touch the button of the
consumable to reset the meter. For example, if you changed the pre-
separation pad, touch Separator Pad. The following screen will be
displayed.
3. Touch Yes to continue with the reset.
To Next Page
Loading...
