A-61670 August 2014 7-9
NOTE: If you do not want to remove the output tray, you can lift the front of the
output tray, then lift the printer access cover and position the printer
access cover behind the height adjustment tab.
3. Turn the feed module release knob to the Unlock symbol and release the
feed module.
4. If you are just replacing the feed module, go to Step 11. If you are replacing
the tires, proceed with Step 5.
5. With one hand, press the locking tabs (one on each side) while holding the
lower housing with the other hand. Pull the upper housing up and away
from the rollers.
6. Remove both rollers.
To Next Page
Loading...
