xii S008769 Rev A
Ngenuity Operator Manual
Each time a symbol appears in the manual, it is followed by important information that you should
read and follow carefully. Below are examples of the symbols found in this manual along with a
definition for each:
W
ARNING
This symbol identifies a hazard or procedure that could cause bodily injury or loss of
life if performed incorrectly. When you see this symbol, be sure to read all of the
information in the section before you continue!
C
AUTION
This symbol identifies a hazard or procedure that could damage or destroy equipment
if performed incorrectly. When you see this symbol, be sure to read all the information
in the section before you continue!
N
OTE
This symbol identifies important information that requires special attention. When you
see this symbol, be sure to read all the information in the section before you continue!
To Next Page
Loading...
