Kodak No. 2 Folding Pocket Brownie - p-54

be given, as the strength of developer used would
make a difference in the time .
As soon as the image has reached tlfe desired
depth remove from the developer to the second
tray and rinse for a moment, turning the print
several times, then place it in the acid ' fixing bath
(Tray No. 3,) keeping the print moving for a
few
seconds, the same as was done when rinsing,
so as to give even and thorough fixing, prevent-
ing stains and other troubles. Leave the 1 print in
this solution until thoroughly fixed; this will take
about fifteen minutes . When fixed remove from
the fixing bath and wash thoroughly for about an
hour in running water, then dry. After drying,
prints may be trimmed - and mounted.
Do not use a fixing bath that has been used for
fixing films.
You should be systematic in working, remem- ·
bering that cleanliness is essential in photo .-
graphy. Care inust be taken to prevent the
Hypo fixing bath in any way gettin g into the
tray containing the developer. Have a dean
towel when beginning the work and wipe your
hands each time after you have handled ' prints in
fixing bath.
Details
. CLEAN DISHES : CLEAN HANDS : The faintest
trace of Hypo-Sulphite of Soda will spoil the
prints if it gets .into contact with them before
the proper time. Great care should therefore be '
used to have both trays and hands clean.
54