Kodak No. 2 Folding Pocket Brownie - p-55

DEVELOPER once used should not be carried
over and used the next day or subsequently.
Don't
Don't use a tray for developing which has pre-
viously been used for hypo solution, pyro devel-
oper or fina1 washing.
Don't use an old fixing solution, it is liable
to cause trouble.
Difficulties : Their Cause and Remedy
VEILED WHITES: Caused by forcing develop-
ment, fogged paper.
REMEDY: Give more time, screen light. Also
caused when image flashes up in developer by
too much exposure, in which case give less time.
MUDDY SHADOWS: . Caused by developer being
used for too many prints. Remedy, use fresh
developer.
CONTRASTY PRINTS. Caused by insufficient
time or negative too harsh. Remedy, give more
time; make softer negatives.
FLAT PRINTS: Caused by overtiming or nega-
tives fiat. Remedy, give less time in first
instance, and if trouble . is with negatives, give
negative less time ; develop further .
STAINS. Caused by forcing development, or
chemically dirty dishes or hands, insufficient
fixing, foreign chemicals. Remedy, do not allow
chemicals other than those given in formulas to
come in contact with paper; keep prints in con-
stant motion the entire 15 minutes -they remain
in fixing, and if due to forcing development give
more time in printing.
RouND, WHITE SPOTS: Caused by air bells
which form on face of print when developer is
first flowed on. Remedy, use more developer,
break air bells with finger.
55