Kodak Pixpro SP1 - Page 51

50
Wind Cut
Wind Cut refers to the reduction of noise
caused by wind.
There are 2 options in 「Wind Cut」:
•
Off
•
Enable
Wind Cut method of operation:
1. After the Wind Cut is enabled, press
to return to the viewnder status. LCD will
display corresponding icons;
2. Press
to start recording;
3. Press
again to nish recording.
00:56:0000:56:00
SD
White Balance
White Balance means that the user adjusts
the color temperature under different light
sources to ensure that the colors are
reproduced correctly.
There are 5 options in 「White Balance」:
•
AWB
•
Daylight
• Cloudy
•
Fluorescent
•
Underwater
White Balance method of operation:
1. After the White Balance is enabled, press
to return to the viewnder status. LCD
will display corresponding icons;
2. Press
to start recording;
3. Press
again to nish recording.