Kodak PIXPRO SP360 4K - Page 53

52
Message Description Processing mode
The camera is set as "Mass Storage", connecting to the computer USB. User should do nothing.
The camera is set as "Web Cam", connecting to the computer USB. User should do nothing.
Connecting to the HDMI device. User should do nothing.
A warning for low battery before shutting down automatically.
Thermwarecannotbeupdatedwhenpowerisinsufcient.
Charge or replace with a new battery.
Updatingrmware.
User should do nothing. The product will
turn off automatically after the update is
completed.
The product will automatically shut down when the battery temperature becomes too high.
Remove the battery carefully when the
product is shut down. The battery will be
good to use again after cooling down.