Kodak play touch - Applying LCD Glare Shield Filter

Setting
. 11:a lIJ
Description
Doing more with your camera
Mm. .W. i.'
Format SD
Card
About
Reset
Settings
Delete everything on the card and format the card.
View firmware and software version.
Reset all settings to factory defaults.
Applying an LCD Glare Shield filter
Make the LCD easier to see in different conditions, such as the
glare of bright sunlight. (Filters do not control the brightness or
contrast of actual videos or pictures.)
IMPORTANT: To apply an LCD Glare Shield filter, the feature must
be turned on in the Settings menu (see page 14).
~ .. 1 Tap the Settings icon ~,
then tap LCD Glare Shield.
2 Tap Filters On.
3 Tap ~ ~ to view each LCD Glare Shield filter:
•
Normal
• High Contrast
• Black and White
After the description fades, the Glare Shield remains.
wwwkodak.com/go/p/aytouchsupport ® 15