30 AT000115-02
EEPROM
Error no. Error Message Text Possible Reason and Solution
1 This operation will require re-calibration of the
CR Reader. Are you sure you want to
continue?
Technician selected “Restore to Factory” button.
2 This operation will override existing CR
Reader parameters. Are you sure you want to
continue?
Technician selected “Import Scanner Settings”
button.
3 Please Note: Failed to read the machine’s
settings. Current settings files will be loaded.
Cannot read machine S.N. from the EEPROM.
Settings will be loaded from the PC (calib folder).
To Next Page
Loading...
