Need help?Do you have a question about the Kodak SSD X150 and is the answer not in the manual?
General| Capacity | 120GB, 240GB, 480GB, 960GB |
|---|---|
| Interface | SATA III 6Gb/s |
| Form Factor | 2.5 inch |
| Sequential Read Speed | up to 550 MB/s |
| Shock Resistance | 1500G/0.5ms |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Warranty | 3 years |
| MTBF | 1, 500, 000 hours |
Guide to cloning your existing disk to the new KODAK SSD X150, including software recommendations and connection steps.
Instructions for performing a fresh installation of an operating system onto the new KODAK SSD.
Steps to prepare your computer for SSD installation, including disconnecting power and battery.
Instructions on how to safely remove the original Hard Disk Drive from the computer.
Guidance on disassembling and attaching the HDD bracket or adapter to the new SSD.
Detailed instructions on physically installing the KODAK SSD into the computer's drive bay.
Steps for reassembling the computer after the SSD installation, including reconnecting cables.
To Next Page