Kodak VERITE Craft 6 - Auto Update; Manual Update

Software Update
Auto Update
Automatically checks for a newer software version and updates
when available.
1 If the latest Software Version is
automatically found on the server, the
message “New printer software
detected.” will be displayed. Press
.
Note(s)
●
To cancel the update process, press
.
2 “Do you want to update..” will be
displayed. Press
.
3 Press
.
4 Select [Yes], then press .
●
If [No]
is selected, the Software Update
will be aborted and the display will return
to [Home].
●
This unit will automatically restart upon
completion of the Software Update.
Cancel Next
Soware Update
New printer soware
detected.
Back Update
Soware Update
Do you want to update
the printer soware?
Installed: *.**.***
Latest: *.**.***
Soware Update
DO NOT unplug the
power cable or power-
off the printer until
update is completed.
Select
Soware Update
Are you sure you want
to update?
Yes
No
Manual Update
Manually checks for a newer software version and updates when
available.
1 From the Control panel, navigate to
[Home > Setup > Software Update], then
press .
2 If the latest Software Version is found on
the server, the message “Do you want to
update..” will be displayed. Press
.
3 Press .
4 Select [Yes], then press .
●
If [No] is selected, the Software
Update will be aborted and the display
will return to the Setup screen.
●
This unit will automatically restart upon
completion of the Software Update.
Back Select
Setup
Google Cloud Print
Print Reports
Restore Factory Defaut
Soware Update
Back Update
Soware Update
Do you want to update
the printer soware?
Installed: *.**.***
Latest: *.**.***
Soware Update
DO NOT unplug the
power cable or power-
off the printer until
update is completed.
Select
Soware Update
Are you sure you want
to update?
Yes
No
61
English