Kodak Zi8 - Page 16

Problem
Solution
Solving camera problems
Camera will not •
turn on. •
•
Videos do not
•
play on a TV.
•
•
Videos are in
•
low resol ution
and/or are not
saved.
ARCSOFT
•
Software issues.
Videos are
blurry.
•
•
•
Ensure that the battery is correctly inserted.
Charge the battery.
Check the Landscape/Macro focus button.
Ensure that the lens is clean.
Ensure that the subject is at least 1m (3.3 ft) from
camera lens.
Turn on Image Stabilization (see page 13).
Ensure that an HDMI or AV cable is properly connected
directly to the TV input (see page 12).
Ensure that the TV menu settings are correct for an H DMI
or AV connection.
Ensure that Video Out is set correctly (see page 13).
If no card is inserted and the camera is powered by the
AC adapter, then videos are taken in low resolution and
are not saved. (The camera is in Demo mode.) Insert a
card or unplug the AC adapter.
Go to www.arcsoft.com/support. (For other applications,
go to their support sites.)
Email, write, phone, or chat with Kodak
(Chat not available in aI/languages)
Get support for your product
Purchase accessories
Get support for accessories
Download the latest firmware
Register your camera
Get information on ARCSOFT Software
www.kodak.com/go/contact
www.kodak.com/go/Zi8support
www.kodak.com/go/Zi8accessories
www.kodak.com/go/su pport
www.kodak.com/go/Zi8downloads
www.kodak.com/go/register
www.aresoft.eom/support
wwwkodak.com/go/zi8support
@ 15