Setting up your camera
www.kodak.com/go/Zm2support 5
Inserting a MICROSD or MICROSDHC
Card
Your camera has limited internal memory—good for a few
practice videos/pictures. Maximum supported card size is 16
GB.
NOTE:
The included MICROSD Card is already inserted.
A card can only be inserted one way; forcing it may
cause damage. Inserting or removing a card while
the camera is on may damage the video/pictures,
the card, or the camera.
Close the door properly See page 2
Purchase accessories www.kodak.com/go/Zm2accessories
1
Turn off the camera.
2
Insert the card until it
clicks and locks into place.
To remove the card,
push and release it,
then pull it out.
NOTE: Avoid touching the
card’s metal contacts.
Metal
contacts
face up.
To clean the contacts, use
a dry cotton swab or a
lint-free cloth.
To Next Page
Loading...
