To Next PageTo Next Page
Need help?Do you have a question about the Koehler K955 Series and is the answer not in the manual?
General| Brand | Koehler |
|---|---|
| Model | K955 Series |
| Category | Measuring Instruments |
| Language | English |
Identifies the specific product model for conformance.
Lists relevant EU directives and conformity standards.
Provides manufacturer name, address, and equipment type/model.
Explains the WEEE directive's purpose and applicability.
Outlines producer responsibilities and design for recycling.
Details substances and components to be removed from WEEE.
Details Koehler's dedication to quality and customer support.
Lists relevant organizations and publications for testing standards.
Lists applicable standards from ASTM, ISO, IP, DIN, and FTM.
Details specifications for the penetrometer and power adapters.
Lists PC processor, OS, memory, and disk space requirements.
Covers general safety, modifications, unit design, and chemical hazards.
Precautions for handling flammable vapors and preventing ignition.
Lists all items included with the penetrometer.
Steps for unpacking and checking for damage.
Guidelines for positioning and environmental setup.
Instructions for power connection and mounting the head.
Covers leveling, power connection, and accessory choice.
Procedure for using the unit with a temperature bath.
Details using and charging the unit's battery.
Connecting the penetrometer to a PC or printer.
Steps to install and register the data acquisition software.
Launching and basic navigation of the software.
Entering test details and configuring the communication port.
Using timer, calculation, and data viewing features.
Adjusting software options and acquiring run data.
Managing test data files within the software.
Alternative methods for viewing and modifying data.
Describes head control, penetration limits, and power functions.
Details plunger trigger, magnifier, precision set, and battery indicators.
Explains preset, reset, time, delay, and conductivity controls.
Steps for powering on and loading the plunger assembly.
Instructions for securing the penetrator and positioning it.
Using preset keys for automatic penetrator positioning.
Setting the duration for the penetration test.
Setting high and low limits for pass/fail testing.
Setting a delay before the penetration starts.
Instructions for using the conductivity probe.
Step-by-step guide to running a penetration test.
How to interpret results and print them.
Steps to prepare for a subsequent test.
Explains common error messages and their resolutions.
Procedure to verify the instrument's calibration.
Step-by-step instructions for calibrating using gauge blocks.
Diagnosing and resolving issues with unit power and battery.
Information on optional attachments and accessories.
Instructions for replacing the light bulb.
Procedure for replacing the unit's fuse.
Steps for replacing the internal battery.
Lists part numbers for replacement components.
How to contact technical service for assistance.
Recommendations for proper storage of the test instrument.
Details the terms and conditions of the manufacturer's warranty.
Procedure for returning products for credit or replacement.
