00:00
13:00
13:00
OPERATION
Clock setting
Once the unit has been connected to the
power supply, the display shows ‘0:00’ and an
acoustic signal is heard.
1. Press Clock/ Kitchen timer once. The
hour digits start flashing in the display.
2. Press
or to set the correct hour
value.
3. Press Clock/ Kitchen timer. The minute
digits start flashing.
4. Press or to set the correct minutes.
5. Press Clock/ Kitchen timer to finish
setting the time. The symbol ‘: ‘ flashes and
the correct time is shown.
6. The time setting process can be cancelled
by pressing Stop/Clear.
Note
The clock must be set when the appliance
is connected for the first time, and also if a
power failure has re-set the clock.
IM_KMW2321_141107A_V02_HR.indb 46 7/11/14 9:23 AM
To Next Page
Loading...
