What to do if Kogan SMARTERHOME KAWFSAC26UA Air Conditioner won't turn back on immediately?
If your Kogan Air Conditioner won't turn back on immediately after being shut down, wait and try again later.
How to fix weak fan strength on Kogan SMARTERHOME KAWFSAC26UA?
If the fan strength for cooling or heating is weak on your Kogan Air Conditioner, try these steps: * Clean the filter to remove any excessive dust. * Remove any blockages from the air inlet and outlet. * Adjust the angle of the louver blades. Also, ensure all doors, windows, and exhaust fans are closed. Check that the mode, temperature, and fan speed are correctly set; adjust them as needed.
What to do if Kogan SMARTERHOME KAWFSAC26UA indoor unit is making abnormal sound?
An abnormal sound from the indoor unit of your Kogan Air Conditioner could be due to several reasons. It might be the fan or compressor relay switching on or off, which is normal. Sounds can also occur when the air conditioner starts or finishes its defrost cycle due to refrigerant flow. Ensure that the air filter is clean, as dust accumulation can cause noise. If the fan speed is set to ‘HIGH’ and causing discomfort, try turning it down.
Why my Kogan Air Conditioner does not work?
If your Kogan Air Conditioner isn't working, make sure the power plug is securely connected to the outlet and that the outlet has electricity. Also, check all fuses to ensure they haven't blown. Finally, make sure that sleep or timer functions are not active; if they are, either wait for them to expire or cancel the timer settings.
Why does my Kogan SMARTERHOME KAWFSAC26UA stop running after a while?
Your Kogan Air Conditioner might stop running after a while for a few reasons. It could be that it has reached the set temperature, in which case it will automatically turn on and off to maintain that temperature. Alternatively, the unit may be defrosting, and it will resume operation after completing the defrost cycle. Also, check if the timer has been set to turn the air conditioner off; if so, turn the unit back on to continue use.
Why are there water droplets on my Kogan SMARTERHOME KAWFSAC26UA Air Conditioner indoor unit?
Water droplets on the surface of your Kogan Air Conditioner's indoor unit are usually normal. This can happen when the ambient humidity is high, causing water to accumulate around the air outlet and panel. It can also occur with prolonged cooling in open spaces; try closing doors and windows. Adjusting the louver blades to a wider angle may also help.
Why is my Kogan SMARTERHOME KAWFSAC26UA blowing out an odor?
If your Kogan Air Conditioner's indoor unit is blowing out an odour, clean the air filter or activate the iCLEAN function. Also, ensure there's no buildup or mould in the area or within the AC unit itself.
Why is my Kogan SMARTERHOME KAWFSAC26UA blowing mist during cooling?
If your Kogan Air Conditioner is blowing out mist during cooling, especially when the indoor temperature and humidity are high, it's likely due to the rapid cooling of the indoor air. This is normal and should disappear as the indoor temperature and humidity decrease over time.
Why does my Kogan SMARTERHOME KAWFSAC26UA sound like running water?
If you hear the sound of running water when your Kogan Air Conditioner is operating, this is the normal sound of the refrigerant flowing through the system.
Why does my Kogan SMARTERHOME KAWFSAC26UA Air Conditioner make a clicking sound when turned on or off?
A slight clicking sound when your Kogan Air Conditioner is turned on or off is normal. It's caused by the expansion and contraction of the panel and other parts due to temperature changes.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.6 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Operating Temperature (Cooling) | 16°C - 32°C |
| Features | Sleep Mode, Turbo Mode, Timer |
General warnings about incorrect installation or operation causing harm.
Crucial information and prerequisites before commencing installation.
Essential safety measures to follow during the installation process.
Checks to perform after installation for electrical and operational safety.
Methods to detect refrigerant leaks in the system.
Solutions for common problems encountered with the air conditioner.
To Next Page
