Kohler Co. 11 1396808-T01-A
INSTALLATION INSPECTION / 安装检查
1
3
2
The seat is designed to be seat-on
detection mode. A wet towel shall be
placed on the right of the seat at the 1/3
position away from the front end (sensing
area).
1/3
■
■ Turn on this product according to the
“
PREPARATIONS BEFORE
INITIAL OPERATIONS
”
section of the Homeowners Guide.
按用户手册的“初次使用前准备”章节开启产品。
■ Continue to read the
“
USE GUIDE
”
section of the Homeowners Guide
to test functions of this product.
继续参考用户手册中的“使用指导”部分来测试产品的不同功能。
Plug power cord into socket. Bidet seat generates one short beep,
wand extends and retracts once, nightlight flash,until initialization
completes.
当电源线插上电源插座,便盖发出短蜂鸣 1 次,喷管伸缩 1 次,夜灯
闪烁,直至初始化结束。