Kohler Co. 9 1396808-T01-A
CONNECT WATER AND POWER SUPPLY /
连接供水供电
Important! First water, then power.
重要！
Important! Risk of product damage. Carefully align the thread of inlet pipe
with that of the bidet seat. Do not break the threads or overtighten the joint.
To fix the joint, tighten it with your hands and twist it a 1/4 turn with a tool.
重要！
1/4
Directly connect the tee joint with the bidet seat and the inlet pipe.
Attention!
For newly installed piping systems, before connecting the inlet
hose to the tee joint, the system must directly drain water for
several seconds to remove sand and dirt from the pipeline.
注意！
Use the hose provided to connect the tee joint and the bidet seat.
Attention! It is required to use the new hose assembly attached with
the appliance. Do not re-use the old one.
注意！
To Next Page
Loading...
Need help?
General
