Kohler CIMARRON K-5697T-TFC - Float Adjustment Instructions

-7-
CLOSEFasten the snap along "CLOSE"
direction.
Fig.#15d
15d
SCALE
5:1
OPEN
CLOSE
E G 2-4mm
Float adjustment instructions: Make
sure the height of surface E is 2-4mm
lower than surface G.
Screw
E
Float
Water Cup
G
Fig.#15e
15e
To elevate water level: Rotate screw
clockwise and raise float to the desired
water level. Elevate water cup to a
proper position as well. (Refer to float
adjustment instructions.)
Fig.#15c
15c
1278411-T01-B