Remote Control - General Features
IMPORTANT! To activate features using the remote control, the remote must be paired with the toilet.
Refer to the ″Remote Control - Setup″ section.
Press the power button to turn the remote control on or off.
Stop - Press the ″stop″ icon to stop an activated cleansing wash feature. Press and hold to turn off
the remote control.
Eco Flush - Press the ″eco flush″ icon to flush the toilet with 0.8 gpf (3.0 lpf).
Full Flush - Press the ″full flush″ icon to flush the toilet with 1.0 gpf (3.8 lpf).
Seat Cover - With the seat unoccupied, press this ″cover″ icon to open or close the cover.
Seat - With the seat unoccupied, press the ″seat″ icon to open or close the seat.
Dryer - While seated, press the ″dryer″ icon to activate air flow. This feature will stop automatically
after 4 minutes or can be stopped by pressing the ″stop″ icon.
UV Disinfection - With the seat unoccupied, press the ″sanitize″ icon to initiate wand disinfection.
Heated Seat Temperature - While seated, press the ″seat temp″ icon, then press the ″+″ or ″–″ icon
to increase or decrease the temperature. The dots to the left of the icon indicate the temperature
setting. There are five settings.
Power Button
Docking Station
1295780-5-A 6 Kohler Co.
To Next Page
Loading...
