Enable/Disable Automatic Features
NOTE: Automatic features come enabled from the factory.
Deodorizer
When enabled, the deodorizer automatically activates while the toilet is in use.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the ″rear″ icon on the remote control. The nightlight will blink.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
Automatic Flush
When enabled, the toilet will automatically flush 60 seconds after the user stands up, lowers the
seat, or leaves the area.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the ″full flush″ icon on the remote control. The nightlight will blink.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
Cover Open/Close
When enabled, the seat cover automatically opens when the toilet is approached. The cover will
automatically close 2 minutes after the toilet has been used.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the ″cover″ icon on the remote control. The nightlight blinks once when the sensor is set to
short distance, twice for middistance, and three times for long distance.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
Prolonged Seating Indicator
When enabled, the toilet will buzz if the user has been on the seat for a prolonged period of time.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Control Panel
Flush
1295780-5-A 8 Kohler Co.
To Next Page
Loading...
