12. Install the Soap Dish
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the soap dish assembly over the wall plate.
Tighten the setscrew with a hex wrench.
Place the soap dish in the holder.
Soap Dish Holder
Plate
Setscrew
Insert
Anchors
Screws
Soap Dish
Soap Dish
Holder
1023327-2-B 10 Kohler Co.
To Next Page
Loading...
